Hyundai Santa Fe Tyre Pressures

Manufacturer-recommended front and rear pressures for every Santa Fe tyre size — in psi, bar or kPa.

5
Wheel sizes
£44
New tyres from

Find the right pressure for your Hyundai Santa Fe

Not sure of your wheel size? It's the last number in the tyre size on your sidewall.

2+ million tyres fitted Best deal, guaranteed
Hassle-free Amend any order free-of-charge
5,000+ fitting centres A trusted network nationwide
Approved brands Manufacturer-backed quality
How to check

Checking your Hyundai Santa Fe tyre pressure

Two minutes at home or on a garage forecourt is all it takes.

Find your pressure

Look up your tyre size in the pressure chart, or check the sticker inside the driver's door jamb or fuel filler flap.

Check the tyres cold

Recommended figures are cold pressures — measure before driving, or at least a couple of hours after a journey.

Top up all four monthly

Check every tyre (and the spare) once a month and before long trips, then refit the valve caps securely.

Tyre Pressure Chart

Recommended pressures for your Hyundai Santa Fe

Cold inflation pressures as recommended by Hyundai. Use the laden figures when the car is fully loaded with passengers or luggage.

Tyre sizeFrontFront (loaded)RearRear (loaded)
215/70 R15 98T 30 psi2.1 bar207 kPa 30 psi2.1 bar207 kPa 30 psi2.1 bar207 kPa 30 psi2.1 bar207 kPa
225/70 R16 102H 30 psi2.1 bar207 kPa 30 psi2.1 bar207 kPa 30 psi2.1 bar207 kPa 30 psi2.1 bar207 kPa
225/70 R16 102T 30 psi2.1 bar207 kPa 30 psi2.1 bar207 kPa 30 psi2.1 bar207 kPa 30 psi2.1 bar207 kPa
235/65 R17 104H 33 – 35 psi2.3 – 2.4 bar228 – 241 kPa 35 – 38 psi2.4 – 2.6 bar241 – 262 kPa 33 – 35 psi2.3 – 2.4 bar228 – 241 kPa 35 – 42 psi2.4 – 2.9 bar241 – 290 kPa
235/65 R17 104T 30 – 34 psi2.1 – 2.3 bar207 – 234 kPa 32 – 38 psi2.2 – 2.6 bar221 – 262 kPa 30 – 34 psi2.1 – 2.3 bar207 – 234 kPa 32 – 42 psi2.2 – 2.9 bar221 – 290 kPa
235/65 R17 108V 32 – 33 psi2.2 – 2.3 bar221 – 228 kPa 32 – 38 psi2.2 – 2.6 bar221 – 262 kPa 32 – 33 psi2.2 – 2.3 bar221 – 228 kPa 32 – 42 psi2.2 – 2.9 bar221 – 290 kPa
235/60 R18 102H 33 psi2.3 bar228 kPa 38 psi2.6 bar262 kPa 33 psi2.3 bar228 kPa 42 psi2.9 bar290 kPa
235/60 R18 103H 30 – 33 psi2.1 – 2.3 bar207 – 228 kPa 32 – 38 psi2.2 – 2.6 bar221 – 262 kPa 30 – 33 psi2.1 – 2.3 bar207 – 228 kPa 32 – 42 psi2.2 – 2.9 bar221 – 290 kPa
235/60 R18 103V 30 – 33 psi2.1 – 2.3 bar207 – 228 kPa 32 – 38 psi2.2 – 2.6 bar221 – 262 kPa 30 – 33 psi2.1 – 2.3 bar207 – 228 kPa 32 – 42 psi2.2 – 2.9 bar221 – 290 kPa
235/60 R18 107V 32 – 35 psi2.2 – 2.4 bar221 – 241 kPa 32 – 38 psi2.2 – 2.6 bar221 – 262 kPa 32 – 35 psi2.2 – 2.4 bar221 – 241 kPa 32 – 42 psi2.2 – 2.9 bar221 – 290 kPa
235/60 R18 107W 33 – 35 psi2.3 – 2.4 bar228 – 241 kPa 35 – 38 psi2.4 – 2.6 bar241 – 262 kPa 33 – 35 psi2.3 – 2.4 bar228 – 241 kPa 35 – 42 psi2.4 – 2.9 bar241 – 290 kPa
235/55 R19 101H 33 psi2.3 bar228 kPa 38 psi2.6 bar262 kPa 33 psi2.3 bar228 kPa 42 psi2.9 bar290 kPa
235/55 R19 101V 33 – 35 psi2.3 – 2.4 bar228 – 241 kPa 35 – 38 psi2.4 – 2.6 bar241 – 262 kPa 33 – 35 psi2.3 – 2.4 bar228 – 241 kPa 35 – 42 psi2.4 – 2.9 bar241 – 290 kPa
235/55 R19 101W 33 – 35 psi2.3 – 2.4 bar228 – 241 kPa 35 – 38 psi2.4 – 2.6 bar241 – 262 kPa 33 – 35 psi2.3 – 2.4 bar228 – 241 kPa 35 – 42 psi2.4 – 2.9 bar241 – 290 kPa

Always double-check against the tyre placard inside the driver's door or your Hyundai handbook — pressures can vary by exact specification and year.

Time for new tyres on your Hyundai Santa Fe?

Losing pressure fast or tread wearing low? Compare fully-fitted Hyundai Santa Fe tyre prices from every major UK retailer and trusted local garages — fitted at a centre near you or on your driveway.

Compare Hyundai Santa Fe tyre deals
Why it matters

The right pressure pays for itself

Tyres naturally lose around 1–2 psi a month, and more in cold weather — so even careful drivers end up under-inflated. Running your Santa Fe below Hyundai's recommended pressure increases rolling resistance, which means more fuel burned, faster shoulder wear and longer braking distances in the wet.

Over-inflating isn't the answer either: too much air shrinks the tyre's contact patch, wearing the centre of the tread and making grip and ride quality worse. The recommended figures in the chart are the sweet spot — and if you're carrying a full load of passengers or luggage, switch to the laden values before you set off.

How pressure shapes your grip on the road

Under-inflated Only the shoulders touch — vague steering, extra fuel, hot edges
Correct pressure Full, even contact — best grip, wear and fuel economy
Over-inflated Just the centre grips — harsher ride, faster middle wear

The red zones are where a mis-inflated tyre carries the load — and where it wears out first.

Help & Advice

Tyre pressure questions, answered

What tyre pressure should a Hyundai Santa Fe be?
It depends on your tyre size — most Santa Fe fitments sit roughly between 30 and 38 psi (about 2.1–2.6 bar). Use the chart on this page to find your exact size, and confirm against the sticker inside the driver's door jamb or your handbook.
Where do I find the recommended pressure on the car?
Most Hyundai models have a tyre placard inside the driver's door jamb; some print it inside the fuel filler flap or glovebox lid. It lists front and rear pressures for each approved tyre size, including fully-laden figures. The owner's handbook has the same table.
When should I use the laden pressures?
Use the laden (loaded) figures when the car is carrying close to a full load — four or five occupants, a packed boot, or towing. The extra pressure supports the added weight and keeps the car stable. Drop back to the normal figures once you've unloaded.
What's the difference between psi, bar and kPa?
They're just different units for the same pressure. UK forecourt gauges usually read psi (pounds per square inch), European handbooks often quote bar, and kPa (kilopascals) appears on many door stickers. 1 bar = 14.5 psi = 100 kPa — or simply switch units on the pressure chart.
How often should I check my tyre pressures?
Once a month, and always before a long journey or when loading the car up. Tyres lose air naturally, and a visual glance won't spot a few psi missing. Check them cold, and if one tyre keeps losing pressure faster than the rest, have it inspected — it may have a slow puncture.
Still stuck? Chat with our team — we're happy to help. 🙂

Contact our tyre specialists

Do you have a non-standard tyre size or just not sure of the lingo? That is what we are here for! Get in touch by email or live chat for the best independent help.

Get in touch