Peugeot Elddis Tyre Pressures

Manufacturer-recommended front and rear pressures for every Elddis tyre size — in psi, bar or kPa.

2
Wheel sizes
£41
New tyres from

Find the right pressure for your Peugeot Elddis

Not sure of your wheel size? It's the last number in the tyre size on your sidewall.

2+ million tyres fitted Best deal, guaranteed
Hassle-free Amend any order free-of-charge
5,000+ fitting centres A trusted network nationwide
Approved brands Manufacturer-backed quality
How to check

Checking your Peugeot Elddis tyre pressure

Two minutes at home or on a garage forecourt is all it takes.

Find your pressure

Look up your tyre size in the pressure chart, or check the sticker inside the driver's door jamb or fuel filler flap.

Check the tyres cold

Recommended figures are cold pressures — measure before driving, or at least a couple of hours after a journey.

Top up all four monthly

Check every tyre (and the spare) once a month and before long trips, then refit the valve caps securely.

Tyre Pressure Chart

Recommended pressures for your Peugeot Elddis

Cold inflation pressures as recommended by Peugeot. Use the laden figures when the car is fully loaded with passengers or luggage.

Tyre sizeFrontFront (loaded)RearRear (loaded)
195/70 R15 104R 60 psi4.1 bar414 kPa 60 psi4.1 bar414 kPa 65 psi4.5 bar448 kPa 65 psi4.5 bar448 kPa
205/70 R15 106R 60 psi4.1 bar414 kPa 60 psi4.1 bar414 kPa 65 psi4.5 bar448 kPa 65 psi4.5 bar448 kPa
215/70 R15 109S 60 psi4.1 bar414 kPa 60 psi4.1 bar414 kPa 65 psi4.5 bar448 kPa 65 psi4.5 bar448 kPa
225/70 R15 112R 60 psi4.1 bar414 kPa 60 psi4.1 bar414 kPa 65 psi4.5 bar448 kPa 65 psi4.5 bar448 kPa
225/70 R15 112S 60 psi4.1 bar414 kPa 60 psi4.1 bar414 kPa 65 psi4.5 bar448 kPa 65 psi4.5 bar448 kPa
205/75 R16 110R 65 psi4.5 bar448 kPa 65 psi4.5 bar448 kPa 73 psi5.0 bar503 kPa 73 psi5.0 bar503 kPa
215/75 R16 116R 65 psi4.5 bar448 kPa 65 psi4.5 bar448 kPa 73 psi5.0 bar503 kPa 73 psi5.0 bar503 kPa
225/75 R16 118R 65 psi4.5 bar448 kPa 65 psi4.5 bar448 kPa 73 psi5.0 bar503 kPa 73 psi5.0 bar503 kPa

Always double-check against the tyre placard inside the driver's door or your Peugeot handbook — pressures can vary by exact specification and year.

Time for new tyres on your Peugeot Elddis?

Losing pressure fast or tread wearing low? Compare fully-fitted Peugeot Elddis tyre prices from every major UK retailer and trusted local garages — fitted at a centre near you or on your driveway.

Compare Peugeot Elddis tyre deals
Why it matters

The right pressure pays for itself

Tyres naturally lose around 1–2 psi a month, and more in cold weather — so even careful drivers end up under-inflated. Running your Elddis below Peugeot's recommended pressure increases rolling resistance, which means more fuel burned, faster shoulder wear and longer braking distances in the wet.

Over-inflating isn't the answer either: too much air shrinks the tyre's contact patch, wearing the centre of the tread and making grip and ride quality worse. The recommended figures in the chart are the sweet spot — and if you're carrying a full load of passengers or luggage, switch to the laden values before you set off.

How pressure shapes your grip on the road

Under-inflated Only the shoulders touch — vague steering, extra fuel, hot edges
Correct pressure Full, even contact — best grip, wear and fuel economy
Over-inflated Just the centre grips — harsher ride, faster middle wear

The red zones are where a mis-inflated tyre carries the load — and where it wears out first.

Help & Advice

Tyre pressure questions, answered

What tyre pressure should a Peugeot Elddis be?
It depends on your tyre size — most Elddis fitments sit roughly between 30 and 38 psi (about 2.1–2.6 bar). Use the chart on this page to find your exact size, and confirm against the sticker inside the driver's door jamb or your handbook.
Where do I find the recommended pressure on the car?
Most Peugeot models have a tyre placard inside the driver's door jamb; some print it inside the fuel filler flap or glovebox lid. It lists front and rear pressures for each approved tyre size, including fully-laden figures. The owner's handbook has the same table.
When should I use the laden pressures?
Use the laden (loaded) figures when the car is carrying close to a full load — four or five occupants, a packed boot, or towing. The extra pressure supports the added weight and keeps the car stable. Drop back to the normal figures once you've unloaded.
What's the difference between psi, bar and kPa?
They're just different units for the same pressure. UK forecourt gauges usually read psi (pounds per square inch), European handbooks often quote bar, and kPa (kilopascals) appears on many door stickers. 1 bar = 14.5 psi = 100 kPa — or simply switch units on the pressure chart.
How often should I check my tyre pressures?
Once a month, and always before a long journey or when loading the car up. Tyres lose air naturally, and a visual glance won't spot a few psi missing. Check them cold, and if one tyre keeps losing pressure faster than the rest, have it inspected — it may have a slow puncture.
Still stuck? Chat with our team — we're happy to help. 🙂

Contact our tyre specialists

Do you have a non-standard tyre size or just not sure of the lingo? That is what we are here for! Get in touch by email or live chat for the best independent help.

Get in touch